Drill Presses
FEATURES     
  •  3/4 inch capacity, 12.5 amp motor, 350 RPM  
  •  Solid state electronic switching  
  •  Feedback speed control  
  •  Line Lock-Out prevents tool from operating should
    voltage be restored to an interrupted line  

SPECIFICATIONS     
  • Voltage  120 AC  
  • Amps  12.5  
  • Drill Capacity  3/4 in.  
  • No Load Speed  350 RPM  
  • Cord Type  9 ft. Fixed  
  • Construction Type  Grounded  
  • Electronic Feedback  Yes  
  • Tap Capacity  1 in.-14  
  • Drill Point Pressure  1,630/1,670 lbs.  
  • Adjustable Base  Yes  
  • Drill Travel  11 in.  
  • Chuck or Taper  Chuck  
  • Tool Weight  70.0 lbs.  
  • Shipping Weight  78.0 lbs.
INCLUDES     
  • Electromagnetic Drill Press Base  
  • 3/4 in. Motor
Adjustable Position
Electromagnetic Drill Press with
3/4 in. Motor - Model 4206-1
FEATURES     
  •  Powerful 9.0 amp 1.1 max HP motor  
  •  Light weight, only 26.5 lbs. with comfortable carrying
    handle  
  •  Capacity to cut up to 1-1/2 in. diameter holes thru 2 in. steel
    with annular cutters, or 1/2 in. diameter holes, 4-1/4 in. deep
    with twist drill bits  
  •  Strong two-coil magnet  
  •  Two positions for feed handle - relocate without tools  
  •  Simple two-button control panel - unobstructed by feed
    handle  

SPECIFICATIONS     
  • Voltage  120 AC  
  • Amps  9.0  
  • Drill Capacity  1/2 in.  
  • No Load Speed  450 RPM  
  • Cord Type  8 ft. Fixed  
  • Construction Type  Grounded  
  • Electronic Feedback  Yes  
  • Tap Capacity  --  
  • Drill Point Pressure  750 lbs.  
  • Adjustable Base  No  
  • Drill Travel  6.6 in.  
  • Chuck or Taper  Weldon  
  • Tool Weight  26.5 lbs.  
  • Shipping Weight  46.0 lbs.  
INCLUDES     
  •  Lubricant Spray
    Bottle  
  •  Nylon Safety Strap  
  •  Two Hex Wrenches
Compact Electromagnetic Drill
Press Kit - 450 RPM Model 4270-21
$75.00 / day
FEATURES       1-1/4 inch capacity, 12.5 amp motor,
500/250 RPM  
  •  Solid state electronic switching  
  •  Feedback speed control  
  •  Line Lock-Out prevents tool from operating should
    voltage be restored to an interrupted line  

SPECIFICATIONS     
  • Voltage  120 AC  
  • Amps  12.5  
  • Drill Capacity  1-1/4 in.  
  • No Load Speed  500/250 RPM  
  • Cord Type  9 ft. Fixed  
  • Construction Type  Grounded  
  • Electronic Feedback  Yes  
  • Tap Capacity  1 in.-14  
  • Drill Point Pressure  1,530/1,600 lbs.  
  • Adjustable Base  Yes  
  • Drill Travel  11 in.  
  • Chuck or Taper  No. 3 MT  
  • Tool Weight  72.0 lbs.  
  • Shipping Weight  82.0 lbs.
INCLUDES     
  • Electromagnetic Drill Press Base, Adjustable Position
  • No. 3 MT Motor
Adjustable Position
Electromagnetic Drill Press with
No. 3 Mt Motor - Model 4208-1
Available at
Hilltop Tool Rental
$99.00 / day