| Floor Sanders |
| Available at Hilltop Tool Rental |
 |  |  |  |  |  |
Essex Silver Line
Model SL-8 Sander
Motor- 1 HP constant speed, 115 volt, AC only,
60 Cycle, single phase. Runs on 14 amps.
Drum- Standard 8” width, soft rubber cover with
aluminum drum core, spring loaded cam paper
locking system, takes 8 x 20 3/16” paper
Drum Speed - 1800 RPM, constant speed
Net Weight - 115 lbs.
Model SL-8V2
The Model SL-8V2 is the same powerful
machine as the SL-8 with the hook and loop
technology. Our new Hook & Loop Drum
incorporates hook and loop technology for
installation of paper. Hook on the drum
attached to the rubber, loop on the paper.
$75.00 / Day
Model SL-8 Sander
Motor- 1 HP constant speed, 115 volt, AC only,
60 Cycle, single phase. Runs on 14 amps.
Drum- Standard 8” width, soft rubber cover with
aluminum drum core, spring loaded cam paper
locking system, takes 8 x 20 3/16” paper
Drum Speed - 1800 RPM, constant speed
Net Weight - 115 lbs.
Model SL-8V2
The Model SL-8V2 is the same powerful
machine as the SL-8 with the hook and loop
technology. Our new Hook & Loop Drum
incorporates hook and loop technology for
installation of paper. Hook on the drum
attached to the rubber, loop on the paper.
$75.00 / Day
Essex Silver Line
Model SL-7 Floor Edger
Motor - 1.5 HP Universal Motor, 115 volt, AC.
Disc Pad - 7" Diameter, rubber backed with
steel, precision balanced, 3600 RPM
Disc Guard - Free wheeling, non-marking
Vacuum - Oversized rerouted chamber for
extra-clean pickup.
Ball Bearings - On all revolving parts,
lubricated and sealed.
Net Weight - 30 lbs.
$65.00 / Day
Model SL-7 Floor Edger
Motor - 1.5 HP Universal Motor, 115 volt, AC.
Disc Pad - 7" Diameter, rubber backed with
steel, precision balanced, 3600 RPM
Disc Guard - Free wheeling, non-marking
Vacuum - Oversized rerouted chamber for
extra-clean pickup.
Ball Bearings - On all revolving parts,
lubricated and sealed.
Net Weight - 30 lbs.
$65.00 / Day
Essex Silver Line
Model SL-1218OVS Orbital Sander
with Dust Containment
The design allows the DIYer to accomplish the work of a rotary
polisher without knowing how to run one!
Applications include:
12" x 18" Orbital Polisher, 1hp, Cast Aluminum base with weight
built into the chassis for low center of gravity, Sealed Baldor motor
protected from dust, fan cooled, thermal overload on motor, Heavy
Duty Rubber towers in four corners support the base & plate
protecting the motor shaft and allowing for easier operation. Larger
(5/8") orbital action, Armature has a 50lb pre-load to absorb shock
and start easier.
$65.00 / Day
12" x 18" Thick white pads $8.95 each
Model SL-1218OVS Orbital Sander
with Dust Containment
The design allows the DIYer to accomplish the work of a rotary
polisher without knowing how to run one!
Applications include:
- Screening floors after sanding with the SL-8 & SL-7
- Screen & recoating polyurethane floors
- Waxed floors scrubbing & polishing
- Wood deck sanding & refinishing
- Parquet floor sanding & refinishing
- New & pre-finished floor sanding & refinishing
- Tile Maintenance
12" x 18" Orbital Polisher, 1hp, Cast Aluminum base with weight
built into the chassis for low center of gravity, Sealed Baldor motor
protected from dust, fan cooled, thermal overload on motor, Heavy
Duty Rubber towers in four corners support the base & plate
protecting the motor shaft and allowing for easier operation. Larger
(5/8") orbital action, Armature has a 50lb pre-load to absorb shock
and start easier.
$65.00 / Day
12" x 18" Thick white pads $8.95 each