 |  |  |  |  |  |
18 Ga., 1-1/4" Brad Nailer Kit
Model BN125A
Uses standard 18 Ga. Brad nails from 5/8" to
1-1/4"
Special hardened driver blade
Tool-free jam release mechanism designed not to
block line of sight
Sequential fire trigger
Strong & light weight die-cast aluminum body
Hard coat anodized magazine with visual reload
indicator
Contact safety located behind the driver guide
for driving brads in tight spaces
Tool-free depth-of-drive adjustment for exact
setting of nail head
Removable rubber nose cushion and directional
tool-free exhaust port
Standard Equipment: Nailer, 1/4" male quick plug
with dust cover, rugged carrying case, box of
1000 brads, oil and operating manual
Model BN125A
Uses standard 18 Ga. Brad nails from 5/8" to
1-1/4"
Special hardened driver blade
Tool-free jam release mechanism designed not to
block line of sight
Sequential fire trigger
Strong & light weight die-cast aluminum body
Hard coat anodized magazine with visual reload
indicator
Contact safety located behind the driver guide
for driving brads in tight spaces
Tool-free depth-of-drive adjustment for exact
setting of nail head
Removable rubber nose cushion and directional
tool-free exhaust port
Standard Equipment: Nailer, 1/4" male quick plug
with dust cover, rugged carrying case, box of
1000 brads, oil and operating manual
| $69.95 |
16 Ga., Medium Crown Stapler Kit
Model MS200
Drives Senco type "N" wire 16 Ga. 7/16" crown
construction staples from 1" to 2" long
Powerful piston with Teflon® ring design that
prevents cylinder bore scuffing - lasts far longer
than conventional "O" rings
Tool-free adjustable exhaust diffuser
Open top-load hard coat anodized magazine with
push-button follower accommodates two
70-staple strips or three 50-staple strips
Quick-release nosepiece for easy jam removal
Tool-free depth-of-drive adjustment to enable
fastening without staple drive-through
Standard Equipment: Stapler, 3/8" NPT air inlet
w/ 1/4" male quick plug with dirt & dust cover,
rugged carrying case, oil and operating manual
Model MS200
Drives Senco type "N" wire 16 Ga. 7/16" crown
construction staples from 1" to 2" long
Powerful piston with Teflon® ring design that
prevents cylinder bore scuffing - lasts far longer
than conventional "O" rings
Tool-free adjustable exhaust diffuser
Open top-load hard coat anodized magazine with
push-button follower accommodates two
70-staple strips or three 50-staple strips
Quick-release nosepiece for easy jam removal
Tool-free depth-of-drive adjustment to enable
fastening without staple drive-through
Standard Equipment: Stapler, 3/8" NPT air inlet
w/ 1/4" male quick plug with dirt & dust cover,
rugged carrying case, oil and operating manual
| Available At Hilltop Tool Rental |
| $199.95 |
2" Flooring Cleat Nailer
Model FCN200
Drives from 1-1/2" to 2" "L" shape cleat nails
Pneumatic driving action consistently drives fastener for better finished installation
Unit comes fully assembled and ready for use right out of the box
Strong, lightweight, die-cast aluminum construction
Non-Marring base is designed to allow driving of fastener close to wall
Better balance for stability - tool sits upright for smoother floor installation
Rear-load gravity fee magazine with a bypass pusher
Fitting is angled so hose does not interfere with magazine or operator
Ergonomic design with longer handle for easier use
Hardened driver blade for longer life
Provides better holding power while allowing the floor to contract and expand
Standard Equipment: Nailer, mallet, air tool oil, wrenches, 1/4" industrial male plug,
and operating manual
Model FCN200
Drives from 1-1/2" to 2" "L" shape cleat nails
Pneumatic driving action consistently drives fastener for better finished installation
Unit comes fully assembled and ready for use right out of the box
Strong, lightweight, die-cast aluminum construction
Non-Marring base is designed to allow driving of fastener close to wall
Better balance for stability - tool sits upright for smoother floor installation
Rear-load gravity fee magazine with a bypass pusher
Fitting is angled so hose does not interfere with magazine or operator
Ergonomic design with longer handle for easier use
Hardened driver blade for longer life
Provides better holding power while allowing the floor to contract and expand
Standard Equipment: Nailer, mallet, air tool oil, wrenches, 1/4" industrial male plug,
and operating manual
| $499.95 |