 |  |  |  |  |  |
| Available at Hilltop Tool Rental |
BTS 935L3
Cut-off Saw
This portable cut-off saws prevent piston jamming and is unbeatable when it
comes to performance and economic efficiency. Its extreme ruggedness is
based on the unique "L3" piston; the name L3 refers to "Long Life Lubrication".
The innovative air cleaner design and the improved engine cooling system
provide for added reliability. The BTS series offers the highest power to weight
ratio of their class plus outstanding ergonomic features.
Length x width x height (L x B x H) (without guide trolley) 31,5 x 11,4 x 15,2 in
Weight 22.5 lb
Disc diameter 14 in
Arbor diameter 1 in
Nominal blade speed 4.300 rpm
Max. cutting depth 4.8 in
Drive engine air-cooled two-stroke petrol engine
Displacement 3.9 in3
Max. power output according to DIN-ISO 4.5 hp
Fuel type petrol-oil mixture 50 : 1
Fuel consumption 2.2 US qt/h
Fuel tank capacity 1.2 US qt
Power Train from engine via centrifugal clutch and V-belt to disc
Specifications may change due to continuous product development.
Cut-off Saw
This portable cut-off saws prevent piston jamming and is unbeatable when it
comes to performance and economic efficiency. Its extreme ruggedness is
based on the unique "L3" piston; the name L3 refers to "Long Life Lubrication".
The innovative air cleaner design and the improved engine cooling system
provide for added reliability. The BTS series offers the highest power to weight
ratio of their class plus outstanding ergonomic features.
Length x width x height (L x B x H) (without guide trolley) 31,5 x 11,4 x 15,2 in
Weight 22.5 lb
Disc diameter 14 in
Arbor diameter 1 in
Nominal blade speed 4.300 rpm
Max. cutting depth 4.8 in
Drive engine air-cooled two-stroke petrol engine
Displacement 3.9 in3
Max. power output according to DIN-ISO 4.5 hp
Fuel type petrol-oil mixture 50 : 1
Fuel consumption 2.2 US qt/h
Fuel tank capacity 1.2 US qt
Power Train from engine via centrifugal clutch and V-belt to disc
Specifications may change due to continuous product development.
Special $699.00 |
BFS 1318AS Self-propelled Walk-behind Saw
These innovative self-propelled walk-behind saws offer an infinitely adjustable travel
speed requiring minimal operator effort. Saws feature a heavy duty hydrostatic
transmission with variable speed drive of 0-80 ft/min. All controls are operable from
the control panel making operation quick and easy for all operators. These saws offer
reliability for any job site, along with operator convenience for added productivity
Weight 310 lb Max. disc diameter 450 mm 18 in
Arbor diameter 1 in
Peripheral blade speed at Ø 350 152 ft/sec
Peripheral blade speed at Ø 400 174 ft/sec
Peripheral blade speed at Ø 450 195 ft/sec
Variable speed ground control 0-80 ft/min
Length x width x height (with extension arm) 65 x 25 x 37 in
Max. cutting depth 6.6 in Tank capacity (water) 26 US qt
Drive engine air-cooled single cylinder 4-stroke gasoline engine
Manufacturer Honda
Displacement 23.7 in3 at 3,600 rpm Power 13.0 hp
Fuel type regular grade gasoline Fuel consumption 4.3 US qt/h
Tank capacity (fuel)6.9 US qt
Power Train from engine via belt to cutting shaft
Starter recoil starter
Specifications may change due to continuous product development.
These innovative self-propelled walk-behind saws offer an infinitely adjustable travel
speed requiring minimal operator effort. Saws feature a heavy duty hydrostatic
transmission with variable speed drive of 0-80 ft/min. All controls are operable from
the control panel making operation quick and easy for all operators. These saws offer
reliability for any job site, along with operator convenience for added productivity
Weight 310 lb Max. disc diameter 450 mm 18 in
Arbor diameter 1 in
Peripheral blade speed at Ø 350 152 ft/sec
Peripheral blade speed at Ø 400 174 ft/sec
Peripheral blade speed at Ø 450 195 ft/sec
Variable speed ground control 0-80 ft/min
Length x width x height (with extension arm) 65 x 25 x 37 in
Max. cutting depth 6.6 in Tank capacity (water) 26 US qt
Drive engine air-cooled single cylinder 4-stroke gasoline engine
Manufacturer Honda
Displacement 23.7 in3 at 3,600 rpm Power 13.0 hp
Fuel type regular grade gasoline Fuel consumption 4.3 US qt/h
Tank capacity (fuel)6.9 US qt
Power Train from engine via belt to cutting shaft
Starter recoil starter
Specifications may change due to continuous product development.
| $3,250.00 blade not included |
| $2,895.00 |
Vibratory Rammer
BS 60-2i
280mm/11in Shoe, Oil-injected
A unique patented oil-injection system provides reliable performance by
eliminating spark plug fouling and carbon buildup. The no-mix system is an added
convenience for operators. Plus an amazing fuel to oil ratio of 120:1 allows for
longer and cleaner running times...up to 65 hours on a single tank of oil. A low oil
shutdown switch prevents running the rammer without oil for trouble-free operation.
LxWxH 26.5 x 13.5 x 38 in Shoe size (w x l) 11 x 13 in
Operating weight 145 lb Shipping weight 157 lb
Shipping size 28 x 16.5 x 39 in Stroke 2.8 in
Percussion rate up to 700 blows/min Travel speed up to 57 ft/min
Compacted area 3,135 ft2/h
Engine Type air-cooled, 2-cycle, single cylinder WACKER WM 80, gasoline engine
Max. power output according to DIN-ISO 3046* 3.1 hp at 4,400 rpm
Operating power according to DIN-ISO 3046* 3.1 hp 4,400 rpm
Horsepower* 4 hp Displacement 4.9 in3
Fuel to oil ratio 120:1 Fuel consumption 1.3 US qt/h
Fuel tank capacity 3.2 US qt Oil tank capacity .75 US qt
Specifications may change due to continuous product development.
BS 60-2i
280mm/11in Shoe, Oil-injected
A unique patented oil-injection system provides reliable performance by
eliminating spark plug fouling and carbon buildup. The no-mix system is an added
convenience for operators. Plus an amazing fuel to oil ratio of 120:1 allows for
longer and cleaner running times...up to 65 hours on a single tank of oil. A low oil
shutdown switch prevents running the rammer without oil for trouble-free operation.
LxWxH 26.5 x 13.5 x 38 in Shoe size (w x l) 11 x 13 in
Operating weight 145 lb Shipping weight 157 lb
Shipping size 28 x 16.5 x 39 in Stroke 2.8 in
Percussion rate up to 700 blows/min Travel speed up to 57 ft/min
Compacted area 3,135 ft2/h
Engine Type air-cooled, 2-cycle, single cylinder WACKER WM 80, gasoline engine
Max. power output according to DIN-ISO 3046* 3.1 hp at 4,400 rpm
Operating power according to DIN-ISO 3046* 3.1 hp 4,400 rpm
Horsepower* 4 hp Displacement 4.9 in3
Fuel to oil ratio 120:1 Fuel consumption 1.3 US qt/h
Fuel tank capacity 3.2 US qt Oil tank capacity .75 US qt
Specifications may change due to continuous product development.
| $2,895.00 |
| $1,389.00 |
Rebar Cutter, 120V
RCE-16
WACKER's rebar cutter series offers efficient and easy cutting and bending of reinforced steel bars.
The cost per cut is lower when using electric-hydraulic equipment than it is when using alternative
cutting techniques, plus the operator is not exposed to noise or flying sparks. These rebar cutters
offer clean and quick cuts for applications with different rebar diameters bringing versatility and high
productivity to any job site. These durable machines have been designed to withstand extreme
loads. There unique design makes them ideal for many applications on job sites where portability
and flexibility are necessary.
Equipment size (LxHxW) 16.5 x 8.5 x 4.3 in Operating weight 15.7 lb
Bar Size . 0.6 in Cutting speed, max. 5 sec.
Hydraulic cutting force 11 tons Drive electrohydraulically operated
Power output* 1.2 kW Voltage 120 V
Rated current 11.1 A (at 120V) Cutter head shearing head
Cutting blade usability - rate 2 Rebar grade 75
Specifications may change due to continuous product development.
RCE-16
WACKER's rebar cutter series offers efficient and easy cutting and bending of reinforced steel bars.
The cost per cut is lower when using electric-hydraulic equipment than it is when using alternative
cutting techniques, plus the operator is not exposed to noise or flying sparks. These rebar cutters
offer clean and quick cuts for applications with different rebar diameters bringing versatility and high
productivity to any job site. These durable machines have been designed to withstand extreme
loads. There unique design makes them ideal for many applications on job sites where portability
and flexibility are necessary.
Equipment size (LxHxW) 16.5 x 8.5 x 4.3 in Operating weight 15.7 lb
Bar Size . 0.6 in Cutting speed, max. 5 sec.
Hydraulic cutting force 11 tons Drive electrohydraulically operated
Power output* 1.2 kW Voltage 120 V
Rated current 11.1 A (at 120V) Cutter head shearing head
Cutting blade usability - rate 2 Rebar grade 75
Specifications may change due to continuous product development.
